If you have come from elsewhere – you’re also very welcome :) please enjoy the
tutorial in its own right
Step by step, I'll go through exactly how I made the journal pictured in my last blog post. Hopefully you will find it easy to follow, and might be inspired to make one of your own (and if you do, I'd love to see it!)
Step by step, I'll go through exactly how I made the journal pictured in my last blog post. Hopefully you will find it easy to follow, and might be inspired to make one of your own (and if you do, I'd love to see it!)
Like many art journallers (or should that be art journallists??), especially those with a
scrapbooking background who are used to having patterned paper to use as a
foundation, I often suffer from “white page syndrome” – starting with a
completely blank page, or, scarier still, a completely blank spanking new
journal, can be daunting!
So here are instructions to build yourself a journal that
starts its life already full of colour, pattern and texture, just enough to
give your pages that little head start…
You will need:
1)
Various papers
2)
A ruler
3)
Paper trimmer or scissors and a steady hand
4)
Leather, grungeboard, upholstery fabric, or any
other durable, flexible material to cover your book
5)
Awl or other sharp pointy tool
6)
Waxed bookbinding thread (if you have no ready
waxed thread you can make your own by pulling embroidery thread through a block
of beeswax)
7)
A large needle
8)
A small plate or saucer
9)
Optional – leather cord or ribbon to make a book
closure
Step one – gather
papers
This is the most fun step – as you get to rummage through
your stash of papers, ephemera, even fabrics, to find potential pages for your
new book – who doesn’t love to spend a few hours paper stroking?
Heavyweight scrapbook papers – especially double sided
Pages from old books and dictionaries, sheet music, braille
paper
Hand painted and inked papers left over from old projects or
experiments
Handmade and speciality papers
Some plainer papers – thin cardstock, watercolour paper etc
– to balance out all the patterns
Old postcards – both the picture and written sides will make
an interesting base for a journal page
And anything else you think might work – acetate panels,
felt and stiff fabric, perforated cardstock, go on, throw it all into the mix!
Other ideas – envelopes, junk mail, your own
photographs….honestly, anything goes!
Step two – prepare
your signatures
“Signatures” are simply the bookbinding world’s word for
groups of pages. For this book, we will
be using three-sheet signatures – essentially little folded pamphlets of 6
pages each.
So you will need to sort the papers and ephemera that you
sorted out in step one, into groups of three that go together fairly well, and
then cut these to size.
For my book I settled on a page size of 7.5” height by 5” width
– so I cut most of my sheets to 7.5” by 10” and then folded in half. At least the outside page of each signature
needs to be full size, but inner pages can be smaller.
Fold all pages, especially the trickier ones like acetate
sheets, firmly with a bone folder to ensure a crisp fold
Add some flaps and pockets to some pages as they will be fun
to work with later on:
(apologies for the state of my work table in some of these
pics, by the way, it has so much old paint on it that it’s a minor work of art in its own
right! :) )
And cut some small mini insert pages from scraps to add in
here and there:
If any of your papers are too thin and flimsy, glue two or
more sheets together with a glue stick or gel medium, to provide a more
heavyweight foundation:
Eventually you will have a set of signatures, each
containing three folded sheets, all cut to size and ready to bind:
I am making a big book here, with many signatures, you might
want to aim for something smaller – 5 or 7 signatures makes a nice book, but
any odd number works well.
Step three – binding
the book
First you need to make yourself a guide.
Take a scrap piece of cardboard, the height of your book (in
my case, 7.5”), fold it in half, and mark a cross on the fold half an inch from
each end.
Then divide the distance between these two crosses into 5
and mark 4 more crosses equally spaced along the rest of the guide, as below:
Use an awl or other similar sharp pointy tool (a needle or drawing pin
would do the job at a pinch), to make holes through the centres of the crosses.
Use this guide in the middle of each of your signatures in
turn, to make holes in the right places in the folds:
You will end up with a stack of pierced signatures like
these:
Next, cut a section from whatever you are using to cover
your book – I am using an offcut of leather – but any strong/durable yet
flexible material – eg grungeboard/grungepaper, leather-like vinyl, upholstery fabric- will work well. This needs to be a little taller than your
book, and wide enough to loosely wrap around your full set of signatures with a
generous overlap (see below):
Mark a line along the right hand edge of the ruler, and use
your guide, folded, to pierce six holes.
Work along to the left, piercing a set of holes for each of
your signatures, just under quarter of an inch apart:
Once you have pierced all of your binding holes – in my case
I decided to go with 11 signatures in the end – so I pierced 11 sets of 6 holes
– you might want to cut a slit to put your closure ribbon/cord through later
on. This is entirely optional, but if
you do want one it’s a lot easier to cut it now than after you have bound the
book!
Cut two slits with a sharp craft knife about half way down
what will eventually become the spine of the book (in between the 3rd and 4th
holes heightwise, and in the middle of your signatures widthwise)
You can see the positioning on this picture of the finished book:
Now you are ready to start sewing.
Place your last signature (the one that will end up at the
back of the book) against the right-most set of holes in the inside cover
(where you made your ruler mark), and thread your needle with a manageable
amount of waxed thread.
Start sewing from inside the book, at the second from bottom
hole – and leave a tail of thread a few inches long:
Sew with a simple running stitch (out one hole, in the next)
up to the top hole, keeping the thread pulled tight as you go.
Then introduce your second-from-last signature, and sew to
the left and into the top hole of the new signature, and use running stitch all
the way down this new signature to the bottom hole.
And carry on running up one signature, over to the left,
down the next signature, over to the left, and so on, remembering to pull the
thread tight as you go. You should see
this pattern emerging on the outside spine of your book:
At some point along the way, you will probably run out of
thread and need to add a new length in.
To join the new thread, make a weaver’s knot, which is very
secure and can be positioned precisely (this is best done inside the book, not
on the outside):
Make two loops in the new thread:
Put the right hand loop through the left hand loop as so:
Tighten the left hand loop, but not completely:
Put the old thread (B) through the big loop in the new
thread. Tighten the knot at C by pulling
the new thread at A. Trim the ends
leaving around a quarter of an inch.
The final knot looks like this:
When you have bound in all of your signatures, sew back the
other way, filling in all the missed stitches at the ends, and doubling up all
of the stitches in the middle for all but your first and last signature.
The completed bound spine will look like this:
Your thread will emerge at the end back where you first
started, where you left the tail of thread in the first signature you
sewed. Tie the two loose ends together
with a normal double knot and trim the ends to complete the binding process:
Step Four: finishing
touches
Use strong scissors to carefully trim your cover material to
size at the top and bottom of the book, and the front cover, leaving
approximately quarter of an inch overhanging the pages:
For the back cover, we want a generous amount of overlap for
the book wrap, as trust me, once you start art journaling in this book it will
grow and grow!
So leave more than you think you need, and then cut the edge
into a semi circular shape using a small plate as a template:
Add a leather cord or ribbon to keep the book closed, and
that’s your new art journal built, and all ready for you to fill it with pretty :)
